深海急流域薄盘礁的炸礁施工技术Reef Blasting Construction Technology of Thin Plate Reef in Deep Sea Rapids
李辰发,何勇芳,应海剑,王磊
摘要(Abstract)：
在涡流、深急流复杂海域条件下,采用漂浮式炸礁船对薄盘礁进行炸礁施工非常困难。根据深急流深海域薄盘礁的特点,分析了现阶段炸礁通用技术及薄盘礁施工技术难点,采用漂浮式炸礁船候潮作业,增大船舶锚机吨位和六锚系统进行船舶定位方法的优势及爆破技术措施等内容,提出了在类似环境下采用漂浮式炸礁船的一种炸礁施工技术,实践证明所设计的方案及相应施工技术合理有效,对类似工程的设计与施工具有借鉴意义。
关键词(KeyWords)： 深急流;炸礁技术;六锚定位;辅助作业船
基金项目(Foundation):
作者(Author): 李辰发,何勇芳,应海剑,王磊
参考文献(References)：
- [1] 汪旭光.爆破设计与施工[M].北京:冶金工业出版社,2011:378.
- [2] 吴金仓,孙健,刘佳政,等.复杂海况条件下水下深孔控制炸礁技术[J].工程爆破,2006,12(1):66-70.WU J C,SUN J,LIU J Z,et al.Technology of underwater deep-hole controlled blasting of marl reef in complicated surroundings[J].Engineering Blasting,2006,12(1):66-70.(in Chinese)
- [3] 李炎锋,朱小楠,李廷枢,等.海上自升式炸礁船设计[J].船海工程,2005(1):14-16.LI Y F,ZHU X N,LI T S,et al.Design of self-elevating reef exploding ship at sea[J].Ship and Sea Engineering,2005(1):14-16.(in Chinese)
- [4] 高伟,王立强.绞吸挖泥船新型施工定位方式的探讨及优化[J].水运工程,2009(6):133-136.GAO W,WANG L Q.Discussion and optimization of new-type dredging locating mode for cutter suction dredgers[J].Port & Waterway Engineering,2009(6):133-136.(in Chinese)
- [5] 吴金仓.深水海底沟槽爆破开挖技术[J].工程爆破,2010,16(4):44- 46.WU J C.Blasting excavation technique for deep-water seabed trench[J].Engineering Blasting,2010,16(4):44- 46.(in Chinese)
- [6] 史光华.川江水下炸礁技术[J].爆破,1994(2):49-53.SHI G H.Underwater reef blasting technology in Chuanjiang River[J].Blasting,1994(2):74-76.(in Chinese)
- [7] 李博凌,蒋中明.大连港鲇鱼湾港区水下炸礁浅点控制技术研究[J].吉林水利,2017(10):13-19.LI B L,JIANG Z M.Study on controlling technology of shallow point of underwater reef blasting at Nianyu harbor area[J].Jilin Water Resources,2017(10):13-19.(in Chinese)
- [8] 赵坤.册子岛航道AB段水下炸礁及爆破安全监理[J].爆破,2010,27(2):74-76.ZHAO K.Underwater explosion and safety supervision in AB-section of Ce-zi Island waterway[J].Blasting,2010,27(2):74-76.(in Chinese)