导爆管雷管反射四通捆串联起爆网路分析与应用Analysis and Application of Nonel Detonator and Four-path Reflecting Unit Tied Serial Initiation Network
余德运,杨军,赵翔
摘要(Abstract)：
导爆管雷管反射四通捆串联起爆网路有单式、单式加强、复式加强、复式交叉等4种形式,其中复式交叉起爆网路可靠性最高。运用可靠性理论和统计分析方法,对导爆管雷管反射四通捆串联复式交叉起爆网路的可靠性进行了计算和分析。结果显示:随着结点阶数增大,起爆网路的可靠度减小;但是增至第3阶后,网路的可靠度不再减小,而是保持不变;复式交叉起爆网路是理想的起爆网路。研究结果在基坑支撑拆除爆破工程实践中得到验证。
关键词(KeyWords)： 导爆管雷管;反射四通;可靠性;起爆网路
基金项目(Foundation):
作者(Author): 余德运,杨军,赵翔
参考文献(References)：
- [1]房泽法,刘建丽.拆除爆破混联网路可靠性分析[J].武汉理工大学学报,2010,32(9):124-127.[1]FANG Ze-fa,LIU Jian-li.Analysis on the reliability ofmixed initiating network for demolition blasting[J].Jour-nal of Wuhan University of Technology,2010,32(9):124-127.(in Chinese)
- [2]房泽法,翁磊,王仕文,等.复杂环境下烟囱基础一次点火开挖爆破[J].爆破,2011,28(3):83-85.[2]FANG Ze-fa,WENG Lei,WANG Shi-wen et al.Primaryignition blasting of chimney base under the complex envi-ronment[J].Blasting,2011,28(3):83-85.(in Chinese)
- [3]范磊,高振儒,郭涛.钢筋混凝土支撑爆破拆除起爆网路可靠性研究[J].爆破,2005,22(3):88-91.[3]FAN Lei,GAO Zhen-ru,GOU Tao.Research on reliability ofinitiation network in blasting demolition of reinforced con-crete girders[J].Blasting,2005,22(3):88-91.(in Chinese)
- [4]余德运,郑德明,赵翔,等.合肥17层高楼爆破网路设计及可靠度分析[J].爆破,2006,23(1):52-55.[4]YU De-yun,ZHENG De-ming,ZHAO Xiang et al.Designand reliability analysis of blasting firing circuit for a 17-storeyed high building in Hefei[J].Blasting,2006,23(1):52-55.(in Chinese)
- [5]张建华,王幸荣,赵泉.路堑爆破非电起爆网路可靠性分析与设计[J].爆破,2005,22(3):116-119.[5]ZHANG Jian-hua,WANG Xing-rong,ZHAO Quan.Analy-sis and design of the reliability of non-electric initiatingsystem in cutting excavation blasting of Anhui Highway[J].Blasting,2005,22(3):116-119.(in Chinese)
- [6]张立国,于亚伦,费鸿禄.导爆管复式交叉起爆网路可靠性分析及应用[J].爆破,2003,20(3):5-7.[6]ZHANG Li-guo,YU Ya-lun,FEI Hong-lu.Reliability analy-sis and application of duplication crossover initiation networkof nonel[J].Blasting,2003,20(3):5-7.(in Chinese)
- [7]钟冬望,杨军,高文学,等.非电起爆系统可靠性分析与计算[J].工程爆破,1999,5(1):71-75.[7]ZHONG Dong-wang,YANG Jun,GAO Wen-xue,et al.A-nalysis and calculation of the reliability of non-electric in-itiation system[J].Engineering Blasting,1999,5(1):71-75.(in Chinese)